Lathe Tracer

                  LATHE TRACER SYSTEM-MODEL 4000

Rosebrook Tracers Model 4000 is a single axis tracer system which features sensitive response.  The tracing is accomplished by the use of a stylus to contact a template.  Movement of the stylus controls the precision ground spool which then directs hydraulic flow to a controlled hydraulic cylinder. The cylinder is attached to a precision machined, hardened and ground slide.  the system can be used on almost any lathe and travel length is unlimited.  The cylinder travel of the basic unit is 3 inches and a unit with 6 inches is available.  The tracing system can be supplied with a hydraulic power unit or you may provide your own unit.  The valve has a standard one year warranty for manufacturing defects-full details on the warranty are available upon request.

TYPICAL FEATURES

OPERATING PRESSURE  200-800 PSI/14.06-56.26 KG/CM
OPERATING TEMPERATURE  60-110 DEGREES F/15.5-43.3 DEGREES C
POWER UNIT REQUIREMENTS  3 GPM/13.65 LPM MINIMUM
FILTERING  2-5 MICRON FILTER REQUIRED
WEIGHT 3 INCH MODEL 62 POUNDS/28.1 KILO