ROSEBROOK 180° TRACING VALVES

The Rosebrook 180° series is designed to be used to control one axis movement of any machine tool. These valves can be used for either tracing or positioning with .000050 inch repeatability in static position. They are designed to operate at any pressure from 100 PSI to 1500 PSI without chatter. The full volume capacity of these valves is 18 GPM at 1000 PSI.
 

MODEL 1000M

The model 1000M is a 180° single axis tracer which features manual retract and a universal stylus which responds to end or side deflection. It is also available in a non rotating universal stylus for the tracing applications upon request. The manual retract is used in applications where the tracer is located within the reach of the operator.
 
 
 
 
 
 

MODEL 1000S

The model 1000S is the same as the 1000M except it has the added feature of solenoid retract. This allows the tracer to be used in applications where the tracer is beyond the reach of the operator
 
 
 
 

MODEL 1300M

The model 1300M is a 180° single axis tracer with manual retract. The 1300M uses an axial stylus which reacts to end deflection only. Used primarily for depth positioning, the 1300M is used primarily for applications where the tracer is within reach of the operator.
 
 
 
 
 

MODEL 1300S

The Model 1300S is the same as the 1300M except it has the added feature of solenoid retract. This allows the tracer to be used in applications where the tracer is beyond the reach of the operator.
 
 
 
 
 
 
 

HOMExxx360° VALVESxxxPARTS/REPAIRxxxCONTACT USxxxFAQ'S